Features: extends from 5.6'/170cm - 15.8'/4.8m.
Uses: Real Estate, Aerial 360's, General Aerial Photography, Events
Cameras: Ultra Compact, Compact, Compact DSLR
Lenses: Recommended loading is 2kg (4.4lbs) for all poles
Pole Series 3 Upper Unit
ABOUT POLE SERIES 3:
Pole Series 3 consists of two units - UPPER and LOWER. THIS LISTING IS FOR UPPER UNIT.
The two units can be mounted to form a longer single unit pole (adapter included by default).
The upper units consists of 3 tubes with diameters of 25mm, 30mm and 35mm (0.98", 1.18" and 1.38").
Closed length is 170cm (5.58ft).
Maximum extended height is 482cm (15.81ft).
The Lower unit consists of 3 tubes with diameters of 39.75mm, 44mm, 48mm (1.56", 1.73" and 1.89").
Closed length is 161cm (5.28ft). Maximum extended height is 449.5cm (14.75ft).
Closed length is 172cm (5.64ft).
Maximum extended height is 925cm (30.35ft).
Maximum recommended loading is 2kg (4.4lbs) for all poles at full vertical extension.
Note: due to size we cannot offer free shipping on this item. Please contact us prior to ordering for actual cost (firstname.lastname@example.org)
Lab tests show even our smallest carbon fiber tube is capable of withstanding extreme vertical weight loads exceeding 100kgs. As a quality assurance measure, each pole is subjected to 50kg pulling tension for over 3 hours to test the integrity of joints and locking mechanism before leaving the factory.
The maximum loading is more related to the stability of support base than to the ultimate strength of the pole. With a rigid support such as custom made car mount, the pole can handle far more than 5kg loads. A load exceeding 5kg should be tested properly before using the system in the crowd. Fanotec bears no responsibility for any injury or damage that may cause as a result of the failure of the pole and support system."
CONTRACT #: GS-02F-016CA MADE IN: HONG KONG